Pix Cogged Belt

DRIP FEED OILER

Pix Cogged Belt

Specification

Section Top Width (mm) Thickness (mm) Angle (Degree) Min. Pulley Dia. (mm) Belt Length Factor (mm) Length Desg
Lp to La Lp to La Li to La
Classical Section
ZX 10 6 36 40 16 22 38 Li
AX 13 8 36 63 14 36 50 Li
BX 17 11 36 90 26 43 69 Li
CX 22 14 36 140 32 56 88 Li
DX 32 19 38 280 40 79 119 Li
Wedge Section
XPZ 10 8 36 56 13 37 50 Lp
XPA 13 10 36 71 18 45 63 Lp
XPB 16.3 14 36 112 28 60 88 Lp
XPC 22 18 38 180 30 83 113 Lp
Narrow Section
3VX 9.7 8 38 56 13 37 50 La
5VX 15.8 13.5 38 112 25 60 85 La
8VX 25.4 23 38 254 53 92 145 La
Light Duty Single V-Belts
3LX 9.7 5.6 36 36 16 22 38 La
4LX 12.7 7.9 36 58 14 36 50 La
5LX 16.7 9.7 38 72 26 43 69 La

Features :

  • Higher power transmission capacity than Wrapped Belts
  • Special cog design for enhanced flexibility and heat dissipation rate
  • Suitable for drives using smaller diameter pulleys and high RPM
  • Anti-static, oil and heat resistant
  • Maximum Belt linear speed (Classical section: up to 30 m/Sec, Wedge: up to 42 m/Sec, Narrow: up to 45 m/Sec)
  • Temperature range: -25°C to +100°C

Applications :

  • Compressors, pumps, fans,vacuum pumps, blowers,generators, heat exchanger,industrial drives, etc.c.

Reference Standards:

  • IS 2494, BS 3790, ISO 4184
  • RMA IP 22
  • RMA IP 23

High-power, Maintenance-free, Moulded Raw Edge Cogged Belts

Section Top Width (mm) Thickness (mm) Angle (Degree) Min. Pulley Dia.(mm) Length Designation
MF3-XPZ 10 8 36 56 Lp
MF3-XPA 13 10 36 71 Lp
MF3-XPB 16.3 14 36 112 Lp
MF3-XPC 22 18 38 180 Lp
MF3-3VX 9.7 8 38 56 La
MF3-5VX 15.8 13.5 38 112 La

Features :

  • Exceptionally high power rating - up to 50% more than standard Belts
  • Special cog design facilitates enhanced flexibility and quicker heat dissipation
  • High transmission efficiency up to 98%, providing optimum output
  • Maintenance-free property, less machine downtime and extended service life
  • Space saving potential
  • REACH and RoHS compliant, provides an eco-friendly system
  • Smooth operation with a minimum tension-drop
  • Temperature range from -35°C to +130°C

Features :

  • High temperature industrial drives, compressors, blowers,high power presses, hot rolling mills, textile machinery, ID fan, FD fans, excavators, pumps, generators, pulverisers, etc.

Reference standards:

  • BS 3790, ISO 4184
  • RMA IP-22

High-power, Maintenance-free, Moulded Raw Edge Cogged Belts

Section Top Width (mm) Thickness (mm) Angle (Degree) Min. Pulley Dia. (mm) Length Designation
MF4-XPZ 10 8 36 56 Lp
MF4-XPA 13 10 36 71 Lp
MF4-XPB 16.3 14 36 112 Lp
MF4-XPC 22 18 38 180 Lp
MF4-3VX 9.7 8 36 56 La
MF4-5VX 15.8 13.5 38 112 Lp

Features :

  • Superior service life ensuring higher returns on investment
  • Extended temperature range from -50°C to +130°C for optimal performance in diverse applications
  • Maintenance-free performance, resulting in minimal service costs
  • Exceptionally high power rating over standard Belts
  • Special Belt surface design for superior flexibility and abrasion resistanc
  • High transmission efficiency up to 98%, resulting in enhanced productivity and reduced cost of ownership
  • Special cog design for enhanced flexibility and rapid heat dissipation
  • Complies with ISO 1813 for anti-static properties for enhanced operational safety
  • Space saving potential, allows compactness in the drive
  • REACH and RoHS compliant, enabling a sustainable ecosystem

Application: :

  • High temperature industrial drives, compressors, blowers, high power presses, hot rolling mills, textile machinery, ID fan, FD fans, excavators, pumps, generators, pulverisers, etc.

Double-cog, Variable-speed

Sections Top Width "TW"(mm) Thickness "TH"(mm) Angle"A"(Degree) Length Designation
XX-TW TH A L 13.0 - 85.0 10.0 to 30.0 22 to 40 Lp

Features :

  • Double-sided cog profile offers enhanced flexibility and higher heat dissipation rate
  • Excellent dimensional stability
  • High lateral rigidity
  • Designed specially to perform smoothly over smaller diameter pulleys
  • Temperature range: -25°C to +100°C

Application :

  • Textile machinery, milling machines, ring frames, etc.

Double-cog, Hexagonal

Section Top Width (mm Thickness (mm) Angle (Degree) Min. Pulley Diameter (mm) Length Designation
AAX 13 10 36 60 Le
BBX 17 14 36 85 Le
CCX 22 17 36 130 Le

Features:

  • Highly flexible, suitable for small diameter pulleys
  • High heat dissipation rate
  • Power transmission from both sides of the Belt
  • Enhanced power rating compared to the standard hexagonal Belts
  • Suitable for serpentine drives
  • Anti-static, oil and heat resistant
  • Temperature range: -25°C to +100°C

Application :

  • Husker machines, rice mills, serpentine drives, textile units, etc.

Fire-resistant, Anti-static

Belt Type Section
Classical FRAS-ZX, FRAS-AX, FRAS-BX, FRAS-CX
Wedge FRAS-XPZ, FRAS-XPA, FRAS-XPB, FRAS-XPC
Narrow FRAS-3VX, FRAS-5VX, FRAS-8VX

Features:

  • Ensures high level of protection against fire hazards
  • Fire resistance properties complies as per IS 2494 Part-II standard
  • Anti-static values found 10 to 15 times superior than the maximum specified value, as per ISO 1813
  • ATEX certified
  • Resistance to emit inflammable substances, while in operation
  • Enhanced heat dissipation rate
  • Superior performance over smaller diameter pulleys
  • Longer service-life

Application :

  • Petrochemical industries, coal mines, fire-prone areas, gas stations, applications involving inflammable substances, etc.

Reference Standards :

  • ATEX Certified
  • IS 2494 Part-II
  • ISO 1813
  • BS 3790, ISO 4184
  • RMA IP-22

Fire-resistant, Anti-static

Section Top Width (mm) Thickness (mm) Angle (Degree Pitch(mm) Length Designation
HAX 13 10 36 15.9 Li
HBX 17 13 40 19 Li
HCX 22 16 36 25.5 Li
HXPZ 10 10 36 12 Lp
HXPA 13 12 36 15 Lp
HXPB 16 16 40 19 Lp
HXPC 22 20 36 25.5 Lp
H3VX 9.7 10 40 10.3 La
H5VX 15.8 16 38 17.5 La

Features:

  • Extended power transmission capacity up to 25% as compared to standard single Belts
  • Lesser number of Belts is required, compared to multiple single-Belt drive
  • Extended service-life
  • Anti-static, oil and heat resistant
  • Temperature range: -25°C to +100°C

Application:

  • Compressors, generators, blowers, hot rolling mills, agitators, industrial fans, separators, etc.

High-power, Maintenance-free, Banded Moulded Raw Edge Cogged Belts

Section Top Width (mm) Thickness (mm) Angle (Degree) Pitch(mm) Length Designation
MF3-HXPZ 10 10 36 12 Lp
MF3-HXPA 13 12 36 15 Lp
MF3-HXPB 16.3 16 36 19 Lp
MF3-HXPC 22 20 36 25.5 Lp
MF3-H3VX 9.7 10 36 10.3 La
MF3-H5VX 15.8 16 36 17.5 La

Reference Standards :

  • Superior power transmission capacity up to 60% more than standard single Belts
  • Special cog design facilitates enhanced flexibility and quicker heat dissipation
  • High transmission efficiency up to 98%, providing optimum output
  • Maintenance-free property, less machine downtime and extended service life
  • Complies with ISO 1813 - for anti-static property
  • Complies with ISO 1813 - for anti-static property
  • Space saving potential
  • REACH & RoHS compliant, provides an eco-friendly system
  • Smooth operation with a minimum tension-drop
  • Temperature range from -35°C to +130°C

Application:

  • High temperature industrial drives, compressors, blowers, high power presses, hot rolling mills, textile machinery, ID fan, FD fans, excavators, pumps, generators, pulverisers, etc.

Variable-speed

Section Top Width (mm) Thickness (mm) Angle (Degree) Belt Length Factor
Lp to La (mm) Lp to La (mm) Li to La (mm)
22V-A22/1422V 20 8 22 15 35 50
30V-A22/1922V 30 10 22 23 46 69
37V-A22/2322V 37 11 22 23 46 69
30V-A26/1926V 30 11 26 23 46 69
46V-A26/2926V 460 13 26 27 55 82
51V-A26/3226V 51 13 26 27 55 82
40V-A30/2530V 40 15 30 30 65 95
51V-A30/3230V 51 16 30 33 67 100
70V-A30/4430V\ 70 18 30 37 77 114
64V-A36/4036V 64 18 36 37 77 114
70V-A36/4436V 70 18 36 37 77 114
76V-A36/4836 76 19 36 39 81 120
(Reference Standards: ISO 3410:1989 (E) / ASAE S211-4)
XHG 17 8 26 15 35 50
XHH 20 10 26 20 42 62
XHI 25 26 27 55 82 82
XHJ 32 15 26 30 65 95
XHK 38 18 26 37 77 114
XHL 45 20 26 40 82 122
XHM 51 22 26 45 90 135

Features :

  • Excellent transverse rigidity and longitudinal flexibility to prevent bucking over minimum diameter pulleys
  • Superior grip to avoid slippage while operating under frequent speed variations
  • Longer service-life
  • Facilitates smooth running without excessive vibrations
  • Temperature range: -25°C to +100°C

Application :

  • Variable speed pulley drives require exact speed control and maximum range of speed changes, recreational equipment, machine tools, etc.

Pix Products

Copyright © 2026 Chindalia Distributors. All Rights Reserved | Design & SEO by : Arsh Infosystems

80-4114 0550
Connect Us