Pix Timing Belt

DRIP FEED OILER

Pix Timing Belt

We are timing belt suppliers, exporters, and stockists in Karnataka, India. The timing belt is one of the most crucial components of power transmission systems. These belts offer a positive, well-coordinated engagement through the use of internally molded teeth that mesh with pulleys featuring axial grooves. Also known as synchronous or positive-drive belts, timing belts are more than just an alternative to various types of belt drives.

Timing belts are quite useful since they have several significant features. They do not require re-tensioning following installation since they retain a set speed ratio. This maintains a large variety of power transmission capabilities and drive speeds at a minimal maintenance cost. Because of the synchronized tooth design, which prevents slippage, the driven system can be timed with high precision. Over a very broad range of speeds and torques, timing drives can function. Timing drives can also be used to operate a wide range of torque applications, from extremely light office equipment to heavy-duty crushing equipment with several hundred kW of torque.

CT (Classical Section Belt)

Section Pitch
(p) (mm)		 Tooth Height
(h) (mm)		 Belt Thickness
(Th) (mm)		 Manufacturing Range Length Designation
Min.
(inch)		 Max.
(inch)
MXL 2.032 0.51 1.14 2.1 177.1 Lp
XXL 3.175 0.76 1.52 5.0 21.90 Lp
XL 5.080 1.27 2.30 4.4 212.8 Lp
L 9.525 1.91 3.60 6.7 270.0 Lp
H
 12.700 2.29 4.30 14.5 272.0 Lp
XH 22.225 6.35 11.20 46.3 227.5 Lp
XXH 31.750 9.53 15.70 62.5 200.0 Lp

STD (Super Torque Drive Belt)

Section Pitch (
p) (mm)		 Tooth Height
(h) (mm)		 Belt Thickness
(Th) (mm)		 Manufacturing Range Length Designation
Min.
(mm)		 Max.
(mm)
S 2M 2.00 0.76 1.36 60 3700 Lp
S 3M 3.00 1.14 2.20 120 6510 Lp
S 5M 5.00 1.91 3.40 150 4000 Lp
S 8M 8.00 3.05 5.30 376 6640 Lp
S 14M 14.00 5.30 10.20 714 5012 Lp

HTD (High Torque Drive Belt)

Section Pitch
(p) (mm)		 Tooth Height
(h) (mm)		 Belt Thickness
(Th) (mm)		 Manufacturing Range Length Designation
Min.
(mm)		 Max.
(mm)
2M 2.00 0.75 1.36 52 750 Lp
3M 3.00 1.17 2.40 60 6804 Lp
5M 5.00 2.06 3.80 180 3750 Lp
8M 8.00 3.48 6.00 184 6880 Lp
14M 14.00 6.02 10.00 812 8120 Lp

High-power, Timing Belts

Section Pitch(mm) Tooth Height(mm) Belt Thickness (mm) Length Desig.
TP2-5M 5 2.06 3.8 Lp
TP2-8M 8 3.48 6 Lp
TP2-14M 14 6.02 10 Lp
TP2-55M 5 1.91 3.4 Lp
TP2-58M 8 3.05 5.3 Lp

Features :

  • 50% to 70% enhancement in power-rating over PIX-X'act® HTD/STD Belts
  • Higher angular speed, resistance to loads and low noise
  • Anti-static properties as per ISO 9563
  • Oil and heat resistance
  • Temperature range -25°C to +100°C

Applications :

  • Food processing machines,paper & packaging machines,printing machines, robotic equipment, conveyors, office equipment, medical equipment, dough mixers,textile machines, etc.

Reference standard:

  • ISO 13050

High-power, EPDM Timing Belts

Section Pitch(mm) ToothHeight(mm) Belt Thickness (mm) Length Desig
HT-TP2-5M 5 2.06 3.8 Lp
HT-TP2-8M 8 3.48 6 Lp
HT-TP2-14M 14 6.02 10 Lp
HT-TP2-S5M 5 1.91 3.4 Lp
HT-TP2-S8M 8 3.05 5.3 Lp

Features :

  • Superior power transmission over PIX-TorquePlus®-XT2 Belts
  • Higher angular speed, resistance to loads and low noise
  • Optimum operational efficiency and augmented Belt life
  • Lower operational cost
  • Anti-static properties as per ISO 9563
  • Ozone resistance
  • Temperature range -35°C to 130°C

Application:

  • Food processing machines, paper & packaging machines,printing machines, roboticequipment, conveyors,office equipment, medicalequipment, dough mixers,textile machines, etc

High-power, EPDM Timing Belts

Section Pitch(mm) ToothHeight(mm) Belt Thickness (mm) Length Desig
DA-XL 5.08 1.27 3.05 Lp
DA-L 9.525 1.91 4.58 Lp
DA-H 12.7 2.29 5.96 Lp
DA-3M 3 1.17 3.1 Lp
DA-5M 5 2.06 5.26 Lp
DA-8M 8 3.48 8.17 Lp
DA-14 14 6.02 14.8 Lp
DA-S5M 5 1.91 5 Lp
DA-S8M 8 3.05 7.5 Lp
DA-5M 5 2.06 5.26 Lp

Features :

  • Facilitates power transmission from both sides of the Belt
  • Highly flexible
  • Extended stability, durability, strength and life
  • Temperature range: -25°C to +100°C

Application :

  • Textile units, paper packaging & printing machines, lawn & garden, hand-held power tools, food processors, office equipment, currency counting machines, medical diagnostic equipment, vending machines,robotics, vacuum cleaners, etc.

Reference standards:

  • ISO 13050, ISO 5296

Fin-fan Timing Belts

Size Pitch Length (mm) Top Width (mm)
FFP-2800 14M 55 2800 55
FFP-3360 14M 55 3360 55
FFP-3500 14M 55 3500 55
FFP-3850 14M 55 3850 55
FFP-4326 14M 55 4326 55
FFP-4578 14M 55 4578 55

Features :

  • High power transmission capacity
  • Suitable for small pulley diameters
  • Maximum Belt linear speed up to 60 m/Sec
  • Extended service-life
  • High temperature resistant from: -35°C to +130°C

Application: :

  • Air-cooled heat exchanger
  • (Fin-Fan), etc.
  • Reference standard:
  • ISO 13050

Elasticated Poly-V Belts

Size Number of Teeth Pitch Length (mm) Top Width (mm) Thickness(mm)
61CCB142 60 61 1.5 11.2
63CCB165 63 63 1.5 11.2
64CCB170 64 64 1.5 11.2
65CCB175 65 65 1.5 11.2
63CCB165-2.5 63 63 2.5 11.2

Features :

  • Specially treated glass cords offer high tensile strength and superior adhesion
  • Excellent fatigue resistant compound
  • Extended service-life
  • Oil, heat and ozone resistant
  • Special dimensions for specific applications

Application :

  • Cotton-cleaner, cotton-gin machines, etc

Packaging Machinery Timing Belts

Section Top Coat Thickness (mm) Top Width (mm)
TCT-L, H 4,6,8 18 to 450

Features:

  • Construction comprises of profile-top-rubber, which is application-specific
  • Provides excellent cushioning coupled with extra elasticity
  • Excellent flexibility to withstand cracking or tearing
  • Offers optimum friction to support the contact material
  • Vulcanized as a single piece to ensure excellent adhesion
  • High abrasion resistance
  • Excellent life
  • Joint free, continuous top-profile
  • Temperature range: -25°C to +70°C

Application :

  • Vertical form-fill and seal machine, packaging machines, soap and cosmetics industry, ceramic industry, bottling plants, etc.span>

People also ask

  • What is the timing belt?
  • The timing belt is a rubber belt with hard teeth that interlock with the cogwheels of the crankshaft and the camshafts.

  • How to check the timing belt?
  • With the engine running and the timing belt cover off, look at the belt as it runs. It should stay tight and straight, if it's flexing, that's bad news and means it is more likely to jump teeth, which will give your engine a bad day indeed.

  • Where is the timing belt used the most ?
  • Overhead camshaft engines mostly use timing belts or timing chains, since these are better suited to transferring drive over larger distances.

Pix Products

Copyright © 2026 Chindalia Distributors. All Rights Reserved | Design & SEO by : Arsh Infosystems

80-4114 0550
Connect Us